What Is AIS (Automatic Identification System)?

The VHF radio system behind every ship-tracking map — how it works, who must carry it, and how you can use it to find a vessel right now.

What is AIS?

AIS — the Automatic Identification System — is a VHF radio transponder system fitted on ships. At regular intervals, the transponder automatically broadcasts a short digital message containing the vessel's identity, position, course and speed. Other ships, shore stations and satellites within range receive these broadcasts, which is what makes both collision avoidance at sea and public ship-tracking websites possible.

The system was designed first and foremost as a safety tool: it lets watchkeepers see the traffic around them by name and intent, not just as anonymous radar echoes. The same broadcasts, however, are also collected by vessel traffic services (VTS), port authorities and — aggregated from thousands of receivers — free public tracking tools like the one on this site's homepage.

Because the broadcasts are unencrypted and standardized, anyone with a suitable receiver can listen. That openness is deliberate: a collision-avoidance system only works if every participant can hear every other participant, and the side effect is a rich, freely accessible picture of what the world's shipping is doing at any moment.

Who uses AIS, and why

The original purpose of AIS is collision avoidance. A ship's officer can see surrounding traffic by name, call another vessel directly using its MMSI, and judge a developing situation from the other ship's course, speed and rate of turn rather than from radar alone.

Ashore, vessel traffic services use AIS to manage congested waterways much like air traffic control manages airspace, and port operators use the same data to schedule pilots, tugs and berths around actual arrival times instead of estimates.

The third group of users is the public. Freight forwarders, exporters waiting on a shipment, journalists, and families of crew members all use AIS-derived tracking services to answer a simple question: where is that ship right now? If that is why you are here, skip ahead to the live vessel search— everything it shows you comes from the broadcasts described below.

How AIS works

AIS operates on two dedicated marine VHF frequencies: 161.975 MHz and 162.025 MHz, known as channels 87B and 88B. Transponders take turns transmitting on these channels using self-organized time slots, so thousands of ships in a busy waterway can share the same two frequencies without drowning each other out. Each unit listens to the traffic around it, maps which time slots are already occupied, and announces its own reservations before it transmits — no central coordinator is needed, which is what makes the system robust in places far from any authority.

Each transponder combines a VHF radio with a GNSS receiver. The GNSS receiver provides the ship's latitude and longitude; the ship's own sensors contribute heading and rate of turn; and the crew enters static and voyage data such as the destination. All of this is packaged into short broadcasts whose content is described in the next sections.

How often a ship broadcasts depends on what it is doing. A Class A transponder on a ship underway updates every 2 to 10 seconds — faster when the ship is moving quickly or turning — while a ship at anchor only needs to report every 3 minutes. Static and voyage data, which rarely changes, is broadcast every 6 minutes.

Class A vs Class B AIS

AIS equipment comes in two classes. Class A is the full transponder required by the IMO SOLAS convention, Chapter V: it is mandatory for all passenger ships, for cargo ships of 300 gross tonnage and above on international voyages, and for cargo ships of 500 gross tonnage and above on domestic voyages. The requirement took effect in 2002 and was phased in between 2002 and 2008. Class B is a simpler, cheaper unit that small craft and yachts can carry voluntarily.

Class AClass B
CarriageMandatory under SOLAS Ch. VVoluntary (small craft, yachts)
Transmit power12.5 W2 W
Access schemeSOTDMACSTDMA
Update rateEvery 2–10 s underway; every 3 min at anchorLower than Class A

In practice this means a container ship on Class A appears on tracking services with a smooth, frequently refreshed track, while a sailing yacht on Class B may update less often and drop out of shore-station range sooner.

Shore-based vs satellite AIS

There are two ways to receive AIS broadcasts. Shore-based stations listen on the same VHF frequencies from coastal antennas; because VHF propagates essentially line-of-sight, a shore station typically covers about 40 nautical miles around its antenna. Networks of these stations blanket most busy coastlines and shipping lanes.

Satellite AIS receivers pick up the same broadcasts from orbit, extending coverage to the open ocean where no shore station can reach. The trade-off is that satellite data is usually a paid premium feed, while shore-based data is what powers most free services. Our own live vessel search is built on AISStream's shore-based feed — excellent near coasts and ports, but a ship in the middle of the ocean may go quiet for hours at a time.

For practical tracking this split matters more than any other factor. A vessel steaming along a coast will update almost continuously on a free service, and its reported destination and ETA are usually fresh. The same vessel halfway across an ocean may show a position that is hours old — or nothing at all until it comes back into shore-station range. When a free tracker goes silent on a ship, the gap almost always says something about coverage, not about the ship.

What AIS data includes

AIS broadcasts fall into three groups:

Dynamic data

Changes constantly, broadcast most often

  • MMSI (the ship's radio identity)
  • Latitude and longitude from GNSS
  • Speed over ground (SOG)
  • Course over ground (COG)
  • Heading
  • Rate of turn
  • Navigational status (underway, anchored…)

Static data

Fixed identity, every 6 minutes

  • IMO number
  • Call sign
  • Ship name
  • Ship dimensions
  • Ship type

Voyage data

Entered by the crew per voyage

  • Destination port
  • ETA
  • Draught
  • Cargo category

If you are tracking a container shipment rather than the ship itself, the vessel's AIS track complements the carrier's milestone events — see our guide to bill of lading tracking for the document-based side of the picture.

Limitations of AIS

AIS is enormously useful, but it is not a guaranteed, tamper-proof tracking system:

  • The transponder can be switched off or can fail, so a missing ship is not necessarily a lost ship — it may simply not be transmitting.
  • Shore-based receivers cannot hear a ship in mid-ocean, and free services rarely include satellite AIS, so ocean crossings can appear as multi-hour gaps.
  • Crews enter the ship name by hand and sometimes abbreviate it, so a name search can miss a vessel even while it is broadcasting — the IMO number or MMSI is the reliable key.

Try it live

The best way to understand AIS is to watch it working. Our free live vessel search listens to the real AIS broadcast stream: type any ship's name, IMO number or MMSI and within seconds you can see its live position, course, speed, destination and ETA — exactly the data described in this article, straight from the ship's own transponder.

Frequently asked questions

Featured on NewTool.site